ASTM E 1352-2008 模型化装软垫的组合家俱耐香烟点燃性的标准试验方法

作者:标准资料网时间:2024-05-10 10:08:53 浏览:9012 来源:标准资料网

【英文标准名称】:StandardTestMethodforCigaretteIgnitionResistanceofMock-UpUpholsteredFurnitureAssemblies
【原文标准名称】:模型化装软垫的组合家俱耐香烟点燃性的标准试验方法
【标准号】:ASTME1352-2008
【标准状态】:作废
【国别】:美国
【发布日期】:2008
【实施或试行日期】:
【发布单位】:美国材料与试验协会(ASTM)
【起草单位】:ASTM
【标准类型】:()
【标准水平】:()
【中文主题词】:可燃性;可燃性试验;防火安全;测试;家具装饰品
【英文主题词】:Combustibility;Combustibilitytests;Firesafety;Testing;Upholsteries
【摘要】:
【中国标准分类号】:
【国际标准分类号】:13_220_40;97_140
【页数】:11P;A4
【正文语种】:英语

下载地址: 点击此处下载

返回跳至顶部

上一篇: ASTM F 1296-2008 化工防护服评价用标准指南
下一篇: BS EN 15493-2008 蜡烛.防火安全规范

Product Code:SAE J1698
Title:Vehicle Event Data Interface-Vehicular Output Data Definition
Issuing Committee:
Scope:This recommended practice aims to establish a common format for displaying and presenting crash-related data recorded and stored within certain electronic components currently installed in many light-duty vehicles. This recommended practice pertains only to the post-download format of such data and is not intended to standardize the format of the data stored within any on-board storage unit, or to standardize the method of data recording, storing, or extraction.Historically, crash data recording technology in light-duty vehicles has developed and evolved based on differing technical needs of manufacturers and their customers without industry standards or government regulation. As a result, wide variations currently exist among vehicle manufacturers regarding the scope and extent of recorded data. For this reason, this recommended practice is not intended to standardize or mandate the recording of any specific data element or to specify a minimum data set. Rather, it is intended to be a compilation of data elements and parameters that various manufacturers are currently recording, as well as those elements reasonably predicted to be recorded in the foreseeable future, and to establish a common format for display and presentation of that data so recorded.This version of the recommended practice is limited in application to vehicular data recorded in single frontal impact events. Provisions for multiple-impact events may be included in the next version. Side-impact and rollover events may be addressed at a later time.

基本信息

标准名称：	模具铣刀第 7 部分：削平型直柄圆锥形球头立铣刀
中标分类：	机械 >> 工艺装备 >> 刀具
ICS分类：	机械制造 >> 切削工具 >> 铣刀
替代情况：	JB/T 7966.7-1995(原标准号GB 6336.7-1986);标准内容已被GB/T 20773-2006 涵盖。
发布部门：	全国刀具标准化技术委员会
发布日期：	1999-05-20
实施日期：	2000-01-01
首发日期：	1900-01-01
作废日期：	2010-01-20
归口单位：	全国刀具标准化技术委员会
出版日期：	1900-01-01
页数：	5 页
批文号：	国机管[1999]279号

适用范围

JB/T 7966.7-1999 本标准是对 JB/T 7966.7-95《模具铣刀削平型直柄圆锥形球头立铣刀》的修订。修订时，仅按有关规定进行了编辑性修改，技术内容未改变。原标准非等效采用国际标准 ISO 3940-1977《直柄锥形凹模铣刀》Ⅱ型。本标准是 JB/T 7966《模具铣刀》系列标准中的一部分，该系列标准包括以下 10 部分： JB/T 7966.1：直柄圆柱形球头立铣刀 JB/T 7966.2：削平型直柄圆柱形球头立铣刀 JB/T 7966.3：莫氏锥柄圆柱形球头立铣刀 JB/T 7966.4：直柄圆锥形立铣刀 JB/T 7966.5：削平型直柄圆锥形立铣刀 JB/T 7966.6：直柄圆锥形球头立铣刀 JB/T 7966.7：削平型直柄圆锥形球头立铣刀 JB/T 7966.8：莫氏锥柄圆锥形立铣刀 JB/T 7966.9：莫氏锥柄圆锥形球头立铣刀 JB/T 7966.10：技术条件本标准规定了削平型直柄圆锥形球头模具铣刀的型式和尺寸。本标准适用于直径 6~12mm 的削平型直柄圆锥形球头模具铣刀。本标准于 1986 年以 GB 6336.7-86 首次发布，于 1996 年 4 月调整为 JB/T 7966.7-95。

前言

没有内容

引用标准

没有内容